6 Steps to Sell Your Used Commercial Truck Online

Using the internet to sell your used commercial truck is an easy way and you can be done with your sale in a quite less time than using conventional methods of selling. If you want to sell your used commercial truck online here are a few preparations to do so that you can get a good price on your used commercial truck.

1. For getting a good price on your used commercial truck you should make it look like a new truck. You don’t want to advertise a dirty truck because it will not attract customers. First step is to go through cleaning of interior and exterior of the truck. Start off from the interior and clean the driver cab and if necessary clean the sleeper cab. The seats, floor and the roof of the interior should also be cleaned thoroughly to remove any stains and dirt. Then move on to the exterior of the truck. Make sure that you clean the undercarriage and the wheels as well and if possible apply some wax to both the interior and exterior so that the paint and leather should get the necessary shine. The windows and windscreens should also be wiped with a glass cleaner.

2. The second step is to get your truck photographed. Now that it is all shiny and like a brand new truck, take it out on a vacant lot in daylight and take pictures of the truck. Some websites allow a certain number of photographs so you need to take multiple photographs and select from them later. Keep in mind that the photographs should be of all the major parts of the truck so that the buyers can get a good idea of the condition of your truck.

3. Make a rough format of the description of your truck. It’s working history, mileage, registration, make, model, maintenance history etc. If there are any problems in the truck, you should mention them to avoid any false information. Avoid false information because then you will end up unable to sell your truck. Don’t forget to include your contact information so buyers can contact you.

4. Paperwork of your used commercial truck should be in order. The title, license plates and registration should all be available to sell your truck.

5. Pricing is also important. If you demand too much, no one will take interest and if you demand low then you will end up selling below market rate. Make some research about your make/model and condition trucks and check their prices. You can also consult a blue book if necessary.

6. Using a good online portal to sell your used commercial truck is the most important point. If you register on a website which does not get enough visitors then you will have to wait several weeks or maybe months before you get any offers. Look for a website which has multiple listings and works with all kinds of construction machinery, heavy equipment and used commercial trucks and trailers, as it is more likely to attract more visitors and customers. Once you have registered with a website of your choice, you can upload the pictures and description so that your truck may be advertised.

http://www.GlobalTruckandMachine.com is the number one web portal for buying/selling used commercial trucks. The website offers multiple listing options with pictures and details of used commercial trucks.

Purchasing Your Copper Sink – Helpful Tips & Information

Selecting a kitchen or bathroom sink use to be easy. There were just a few large companies selling ceramic, enameled steel, cast iron and stainless steel sinks. In the past decade, there has been an explosion of new products in the sink category and a growing demand for hand crafted and custom work. There have been several “new” sink mediums gaining recent acceptance – glass, various stones, brass, copper, and even wood. This article will focus on copper sinks and what to look for before making your purchase.

Copper is man’s oldest metal, dating back more than 10,000 years. Its use in the home in modern times ranges from copper tubing in your plumbing system to some of the finest cookware available. Restaurateurs, hoteliers and interior decorators look to copper and brass as naturally inviting metals that make a statement of quality, comfort and beauty. It is no wonder that copper has also become a popular material for sinks in the kitchen, bath and bar.

Copper artisans abound throughout the world, however the artisans that have gained a reputation for making sinks has been primarily centered in India, Mexico and the US. Most of the shops making “hand crafted” copper sinks are small and the methods used to construct sinks goes back centuries. The term “hand hammered” has recently become synonymous with Mexican sinks. This term refers to the original ancient techniques that artisans have been using for centuries in this area. Copper sheets are literally hammered into shape and hand finished.

The results are somewhat rustic, but truly unique and one of a kind. Copper sinks in the US are made with similar techniques but are more often “smooth” rather than “hammered”. US copper craftsmen are dominated by shops doing custom work primarily for commercial projects such as restaurants. You can see examples of all these sinks at Sinks Gallery. They specialize in artisan crafted sinks and have one of the largest selections of copper sinks available, as well as sinks from all different mediums including glass, ceramic, various stones and even wood.

There are three primary differentiators determining quality – construction technique, copper thickness and the company you are buying from. Construction quality is made up of several factors – how corners are constructed, welding technique and proper dimensions for ease of installation. Quality can vary even when considering sinks made in the same town such as many of the sinks from Mexico. The buyer should make sure they are buying from a legitimate company that knows the product and is not selling “seconds”. In the world of hand crafted products, not all sinks are created equal and oftentimes there are two or more quality levels sold by the same shop (i.e. “firsts” and “seconds”).

Copper starts out in sheets of various thicknesses or “gauge”. The thickness of the metal can also be referred to by the weight per square foot. The thicker the gauge copper, the lower the number. Most bath sinks are made from 20 gauge (the thinnest) to 16 gauge (the thickest) and most kitchen sinks range from 18 gauge to 14 gauge. When shopping for copper sinks, always ask about the gauge and be aware that a thicker gauge sink will cost more – and in many cases is worth it! A lightweight gauge metal can result in a “tinny” sound when running the faucet.

Finally consider the store you are buying from. If a copper sink seems “cheap” in price, there is usually a reason. I have seen many of the copper sinks sold on the most famous “auction site”. All I can say is “buyer beware”, or more to the point “you get what you pay for”…. If something goes wrong with your sink or there is a problem when it arrives, you want to make sure the company you purchased from will stand behind their product. Think carefully about buying internationally. Too often, a sink that is received isn’t as represented. A reputable dealer should identify their shipping location, clearly state their warranty and return policy and be available for consultation.

I am a fan of copper sinks. I think they are rugged yet elegant – especially as they age. The rich highlights and undertones of the patina process are constantly evolving. A copper finish is a “living finish” and never really stops changing in color. That being said, the evolution of a copper finish is gradual, and as it ages it becomes even more handsome. You can greatly reduce this change with the use of wax or even a lacquer product, but personally I like to let the copper evolve. Most often this process results in a mellow brownish weathered copper patina. I like to refer to it as the basins soul.

Copper sinks often come in various finishes from a bright copper finish (like a new penny) to a dark patina (we call ours “Dark Smoke”) and everything in between. The copper finish you choose is a matter of personal taste, but oftentimes our clients prefer the more “weathered” patinas to avoid the upkeep or uncertainty associated with shiny copper. If you want to slow down the patina process, try applying a wax like “Renaissance Wax”. Applied every few months, the wax will provide a barrier between the copper and the environment.

Copper sinks for the kitchen come in two basic forms: Under Counter Mount or Farmhouse style. The rustic nature of copper sinks lends itself well to the farm sink style. Sometimes referred to as “apron front” sinks, these sinks come in a variety of sizes, shapes and with different configurations – i.e. single bowl, double bowl and even triple bowl. Bath sinks are generally available in three styles: vessel (above counter mount), “drop-in” or under counter mount. Usually the lip style determines whether the bath sink is a drop in or undermount. Be sure to order the proper lip style to accommodate your project. A recent trend in bathroom design is matching a copper mirror frame to the sink in the same patina. This can help create consistency in the look and feel of the d├ęcor.

If you have any other questions before you purchase any sink, feel free to give us a call at Sinks Gallery or Copper Sinks Online – 1-877-320-0800. We would be happy to answer any other questions you might have.

Commercial and Industrial Painting Tips

Commercial and industrial buildings, like their residential counterparts, require constant upkeep which includes the occasional paint job. Yet, painting projects for commercial and industrial ventures are often very different in scope and execution than, say, a single-family home. There are, however, some simple tips that landlords and property owners can follow that will expedite the process and make sure the painting job is completed to satisfaction:

Planning your Painting

Planning is always a necessary component to any successful painting project and it becomes increasingly important with larger commercial or industrial buildings. Before you even begin a consultation, have a general vision in mind of what you would like to have completed. Additionally, keep in mind any time restraints which may arise and periods of high commercial traffic which may be inconvenienced by any significant painting upgrades.

Think Through the Feel and Brand of your Commercial or Industrial Building

Commercial and industrial painting is one of the most efficient ways to solidify a cohesive brand image. Think about what sort of image you would like to present to your customers and work based upon that. Painting of this variety should be used to highlight your goods or services and should not be disruptive in its general appearance. This process may involve consulting with employees and customers over what works and what doesn’t work with the current paint job of your commercial or industrial building.

Consider a Green Paint Job

Paint manufactures have made leaps and bounds in the past few years, creating a number of environmentally-friendly products. A paint job featuring a reflective coating could reduce the energy costs of your commercial or industrial enterprise. Of course, there are the additional environmental benefits involved in the production and application of such paints.

Maintain an Open Dialogue with your Painting Contractor

For any large scale project to be successful, it’s imperative you maintain a dialogue with your contractor. Before the project begins, you and the commercial or industrial painting contractor should have the same expectations and the same vision for what should unfold. Last minute changes can easily cause headaches for all parties and deter from a commercial or industrial painting project’s efficiency.

Steps to Take to Find a Commercial Lendor

When you are looking to finance your next commercial real estate project, you need to find a commercial lender. Why, you might ask? You need someone on your side who is an expert in the nuances of the kinds of loans that are a part of commercial real estate. But finding one can be kind of tricky. Here are a few tips to help you find a great commercial lender.

Commercial banks and lenders often specialize in the larger companies, so finding ones that specialize in small businesses is often harder. The good news is, especially since 2012, small business lending has been on the rise.

One way to find a small business friendly lender is to look for a smaller lender. Community-based banks and credit unions are often much more likely to loan to a local business. Why? It’s partly based on their ability to know you and your business better than the big guys can. It’s also based on their willingness to support their local economy by investing in it. Some local banks are also participants in the Small Business Credit Initiative which is a federal program to help give small businesses a boost.

Another way to get a commercial loan is to find a lender who offers loans backed by the Small Business Administration. These loans are perfect when you don’t have the criteria that other loans would require for evaluating your creditworthiness. The SBA backs the loans, giving lenders the ability to loan to you without fear. You can either check to see if the lender lists that it is a Preferred SBA Lender or you can consult the SBA for a list of local lenders who are a part of the program.

If you can, find out who will actually be doing the loan evaluation and making the final decision, whether it is the bank itself or if they send off your loan to an outside company. This can change who you want to work with if you intend to work locally.

Once you do find a lender you like and are willing to work with, do your research on the company. You will be with them for several years while you pay off the loan, so you want to be sure you can have a good relationship with them. Check the company track record and make sure that they are likely to be around in 10 -15 years when your loan matures. You can also check to see if the company offers annual financial reviews to see if there are other financial products that it might offer you that can be of benefit.

The Commercial Finance Association also offers you some advice and help finding a commercial lender. Their service is free and you can do your search by what kind of loan you are seeking, the amount you want to finance, and where you are. The CFA will then give you options for a lender who will match what you are looking for.

If you can, think about all of this and create your strategy before you actually need the loan. It will make things go more smoothly and faster when the time comes.

Steel Building Advantages

Before we begin to give you additional information on this topic, take a moment to think about how much you already know.

One wit for the fleeting lump of the prefabricated steel building business is the actuality that steel building manuactualityurers have bent prefabricated logics for a broad array of applications. Steel buildings worn to be imperfect to storeroom facilities and arability hangers. Now, steel is worn very successfully for structures as small as toll booths and vending structure shelters, and as large as barns and agricultural facilities, work shops, sports facilities, even churches and retail centers. Steel buildings are frequently worn in superior buildings like commercial arability hangers and sports arenas, where a large clear span seat is necessary. (Clear span is an interior seat of a building where the roof is supported by the nearby structural parapet and framework, and not with columns.)

Steel provides some other payback in many circumstances. Usually talking, prefabricated steel buildings can also be erected more hastily than traditionally constructed buildings. Arrogant that the prefabricated kit does not need significant customizing, the pitch’s strategy segment is summary considerably with the use of the steel building logic. While this is constant for the strategy segment, position preparation and construction segments for superior steel buildings are usually comparable with equally sized angle-up structures.

Perhaps the core wits for the mounting use of steel buildings are construction price. arrogant that the building hysterics the parameters and limitations of what is appropriate for steel, prefabricated steel building kits are usually excluding posh than custom-strategies structures built with traditional construction or even angle-up construction. Also, with the use of finishes, facades and other roadblock claddings, builders can ability lovely facilities that duck the traditional “tin shed” look associated with steel buildings?

From here on out, we will give you tips on what can make this subject a little more helpful to you.

For slighter warehouse, industrial and commercial pitches, particularly those under 50,000 adjust feet, these payback make steel buildings an awfully attractive alternative for the price-conscious building vendor. Also, steel buildings are frequently the right selection for superior buildings where a large clear span seat is necessary.

If you would like to learn more about this subject, take a look at our wide selection of articles to see if any interest you.

Tips on Selecting the Right Company for Your Office Fit Out

If you are thinking of updating your office building, then you need to make sure that you hire the best office fit out company for the job. So here are some tips in looking for the right one.

You should start by coming up with a list of companies that offer commercial fit out and refurbishment services in your location. You can make use of the Internet for this. There are absolutely lots of them that you can find online and you can also check out their websites to find out more about the services that they have offer.

Remember to focus your search only to companies that have a proven track record in the field of business that you are in. For those who run a gym or fitness center, look for a fit out company with the right credentials in commercial gym design and build.

Once you found the right company for you, then you can contact them and arrange a meeting to discuss the project.

When deciding which companies to hire from the list you have gathered online, here are some things that you must consider.

Experience

As mentioned earlier, it is important that you chose a company with previous experience in your domain. For the businesses in the retail sector, as an example, there are lots of fit out companies that are involved with retail interior design so you will certainly not have a hard time in looking for one. The key thing is to go through their references, and visit the sites they have worked on.

Accreditation

Some companies that offer fit out services would claim that they are certified and that they have proper accreditation. To find out if they are really accredited or not, ask for a copy of the certification that proves that they are certified to do office fit out services. The accreditation is important as this ensures quality of work.

Insurance

A lot of companies end up making a mistake by hiring a company that does not have the appropriate insurance. Public liability insurance is very important as this ensures that they will cover any cost on the damages that might occur on the property or the people during the office fit out.

Health and Safety

You should also consider the health as well as the safety of the employees within your company. Therefore, talk to the fit out specialists and find out if they follow the proper health and safety regulations while working within your company’s premises. This is very important especially if your business operation will be going on while they do the fit out and refurbishment.

Tips on Securing the Best Commercial Roadside Assistance Company

With a myriad of companies offering roadside assistance plans, how do you go about obtaining the best plan for your company’s needs?

You’re probably already familiar with the extensive benefits a roadside assistance plan can offer. From saving you hundreds of dollars in towing fees and minor repair costs to potentially saving your company thousands of dollars in lost business, should a disabled vehicle leave your employee stranded and unable to make his delivery or schedule appointment, a roadside assistance plan is a very valuable resource.

When a company vehicle, whether it be a commercial, fleet, construction, or rental vehicle is an important tool in conducting your business, you don’t want to choose the wrong roadside assistance company that could leave you without it for hours, or even days. Finding yourself broken down on the side of the road is a helpless feeling, and you don’t want to your employees to be in this scary situation either.

The right company can make a difference in turning a bad situation to at least a tolerable experience.

  • Finding and securing the best commercial roadside assistance company who meets your needs before trouble strikes, is imperative.
  • Ask about the company’s response time, and do some research to determine if this information is in line with their past and present customers’ experiences. Check references and read user reviews to see what other members have to say.
  • If you have a lot of company vehicles you’ll need covered, find a provider who will offer discounts based on the number of vehicles.
  • Instead of just picking one and hoping for the best, pick out a few different programs and compare them. Be sure to compare apples to apples by comparing quality, benefits and cost of the service.
  • If you or your employees do a lot of traveling, ask about long-distance towing, traveling services, maps and routing and travel discounts.
  • Call the toll free number the company provides for roadside assistance. How long does it take before you reach a live person?
  • After narrowing down your options, talk to company representatives. Knowledgeable and friendly representatives are usually a sign of a good company. A helpful staff that doesn’t hesitate to answer any questions that you have will give you a good idea as to the type of environment and quality of service they offer.

Signing up for a commercial roadside assistance company doesn’t have to be painful: learn about your options and get the best service for your company vehicles.

Top 5 Tips For Hiring The Best Commercial Roofing Company

Having a top quality roof is one of the most essential construction processes for a house. Getting this done is not a work for any remodeling firm or construction contractor but is a task which should be given to a professional and commercial company. Whether it is roof installation, repair or any other kind of related work or service, you will need the help of a professional who can carry this task out with ease and expertise. But how does one choose a reliable company? Well, the following tips should be of help:

1. The first and most important tip for hiring a commercial roofing company is to do a background check or research on the various available options. During this research, you must try and find a company which has an impeccable track record, is trusted in the markets and has certified and experienced workers. Basically, the idea is to go for a trustworthy, reliable and high quality service provide for long lasting and effective roof repair and other services.

2. The next tip is to hire only that company which provides you several services and does not specialize in only one. For example, your roofing company must be able to repair, install, maintain and service your roof and also fulfill other roofing related requirements like solving leakage problem and suggesting solutions to other issues.

3. The roofing company should be willing to suggest numerous roofing options like metal, slate, shingle, asphalt and flat roofing etc. You should have many options of materials and qualities to pick from because the material of the roof is an important aspect which must not be compromised on.

4. For whatever material you choose, for example if you go for metal roofing, the company must offer several designs, patterns and style options. This is another important tip which will help you select the best roofing service provider or installation company.

5. Last but not the least, your commercial company must be willing to offer services of metal roofing etc. at affordable prices and only after a free estimation of cost. If the service provider does not offer emergency services, then you should probably consider some other option because this too is an important point which will help you in the case of unexpected leakage or random roof related problems.

Now that you know how to select a commercial roofing service provider, you must not waste any more time and try to contact one now. Make sure your service provider does not charge you more than the required amount and this can be done by comparing prices of a few companies.

Things to Ask at the Time of Selecting a Contractor for Your Project

Hiring a commercial general contractor is not an easy task. There are a lot of things involved. At the time of selecting a contractor, you must take care of a few important things. A right selection can bring your success easily.

First of all, you need to be sure about your budget, required time frame and probable cost of the project. Depending on all these, you can decide a commercial general contractor to do the job on behalf of you. He will supervise the whole matter.

You should choose one that you can afford easily. You need not go to select one who is beyond your budget.

Budget: You must be sure about the maximum amount that you can spend for it. If it is a bidding project, an accurate calculation is intensely needed.

Lowest Bid: You should not be the lowest bidder. If you try to become the lowest bidder, you may make a loss. Sometimes, you may need to compromise with the quality that can increase the chance of losing your reputation.

Cost: Your project cost should not be more than your capacity. You have to calculate your budget and affordability at every step. More expense increases the chance of project incompletion.

Duration: You must set your plan and goal perfectly so that you can meet them exactly. You should try your level best to complete the project righteously before time or on time.

At the time of selecting a commercial general contractor, you should weigh and consider a few important things to make your project highly successful.

Given below are the tips:

Experience: This is the most important thing to consider. To choose a right contractor, you should know his experience. He must be professional and experienced in handling commercial projects like institutional buildings, IT parks, and big commercial constructions. Furthermore, he must keep himself updated with the latest construction styles.

Expertise: Your contractor must be an expert in planning, organizing, staffing, controlling, and completing your project perfectly. He must be capable of meeting your need within your budget. The estimated cost should not exceed the real cost. He must have the capability to calculate it perfectly.

Area of specialization

You should choose one who specializes in commercial construction. Make sure whether he is capable of meeting your need righteously. If the contractor has a website, you can visit it to have a look at the services and his areas of specialization and you can get all the benefits of selecting a commercial construction contractor.

General Liability Insurance For Contractors – 4 Tips to Avoid Coverage Surprises

General liability insurance is one of the first types of policies you will need if you are starting a new business. At Clinard Insurance we are seeing many new small business startups.  Starting your own company is popular these days with the layoffs we are seeing in our economy. The best choice is often to pursue something that you love doing and so we are seeing lots of people starting new businesses around their building skills. But just because you love to build things doesn’t mean you know the best way to protect yourself and your company from lawsuits.

Here are some tips for pitfalls that you should avoid when buying general liability insurance.

 

Choosing the right agent. The first place people generally go for their business insurance is the insurance agency that handles their home and auto insurance. In some cases this will work out well. But the risk is that your current agent may be licensed to sell you general liability insurance on your new company while really possessing very little experience in evaluating the hazards and risks of your specific type of company. I would suggest that you go out there and look for an agent that specializes in insuring other small businesses like yours. Ask your competitors who they used. At Clinard Insurance we have a niche specialty in small contractors and we speak their language and understand their needs. If your agent doesn’t specialize in your business, I suggest you find one who does.

 

Claims Made or Occurrence Policy Type: Construction claims made policies became popular in the mid 1980’s and have been around ever since. The promise of these policies were lower rates, but at what long-term damage? In some instances there is no cost savings. Claims made polices for a contractor are the worst possible policy you can buy. Let me explain: Claims made policies allow you to make claim on your policy only during the year they are in force. Contractors have claims down the road, not always just in the same year as the project is built!  Also, if you want to leave that company and go to another company, you will have to purchase additional insurance to cover you for the next 10 years… that’s right, 10 years! Why? Because the law allows customers to file a lawsuit for construction problems for up to 10 years after the project was completed.

 

An Example:

You build a new room addition, everything goes well and you and your customer are very happy with the final outcome… 4 years later your customer calls you and says that the roof is leaking and water came in the house and ruined his new $25,000 grand piano. He expects you to repair the roof, the drywall, wallpaper, carpets and, of course, replace the grand piano….

A claims made policy will not allow you file a claim 4 years later unless you stayed with that same company the whole time. If you intend to change companies after you have had a claims made policy, you must make a decision. If you want to have protection for any claims that have not occurred yet, but will in the future, you will have to purchase “tail” coverage. This coverage will extend the time in which you can file a claim. And tail coverage is not cheap. 

If you decide not to buy the “tail” you will not be able to report a claim against the claims made policy. And to make matters worse, some companies do not offer the 10 year extension.

So…. When your claims made policy comes up for renewal, you must decide:

  • Do I leave the company and pay the additional insurance for coverage for the next 10 years, or go without protection.
  • Do I stay with the same company? Their prices on the new year may stay the same or go up sharply.
  • Do I switch to another company who has better rates and coverages?

This limits the marketplace available to you, and makes it harder to accept a better bid from another insurance company. Claims made policies may work in other industries, but for Contractors they are a disaster. Take time after reading this report to see if your current policy is either an occurrence form or a claims made form…..

 

Insurance Company Rating It is up to you to do the due diligence and ask your agent about the financial health of the company from whom you are buying your general liability insurance. As the previous tip implied, sometimes the claims may be very much delayed and you need to know that your company can pay a claim for you 10 years from now. Use only A rated or higher insurance companies to protect your business.

 

Exclusions, Understand Them Clearly   Be sure to take the time to ask your agent about the policy exclusions and what they may mean for you. Here are some exclusions that contractors should consider when purchasing a general liability insurance policy:

Pesticide, Herbicide and Fungicide Exclusion, Employment Practices Liability Exclusion, X.C.U exclusion, Contractors Warranty Exclusion, Professional Liability Exclusion, Asbestos, Independent Contractors. If you don’t know exactly what these mean for you on your policy, contact your agent and get the help you need to understand it clearly. This may change the way you run your business.

 

Subcontractors   Be sure that you understand just how your policy treats subcontractors. Are you covered if they have no insurance or not enough for the loss?  How much coverage should you require of your subcontractors? How often should you obtain certificates of insurance? How can you be sure that the certificate of insurance is legitimate. (I have seen fraudulent certs for sale on eBay before). If you are not clear about the answers to these questions vis-à-vis your business and your general liability policy, you should call your agent right away and get the answers you need to sleep well at night.

 

As you can see buying general liability insurance is not a simple as calling your agent and asking for a quote. You need an experienced professional that understands the policy forms and your business. At Clinard Insurance we specialize in helping small contractors navigate the dangerous waters of the insurance world. If we can help you further, or if you would like more information about Clinard Insurance Group, please visit our web site.